Rubber Coarse-Crusher:
The machine is applicable for cracking scrap rubber.
Characteristic:
1.The roller is made of chilled cast iron with vanadium and titanium alloys.The roller face is hard and anti-wear. Both the front roller and the back roller are fluted. The internal cavity of the roller is processed to make temperature well proportioned on the roller surface.
2.The machine is equipped with an overload protection device to prevent the major components from being damaged due to overloading.
3.The machine is also equipped with an emergency device. When an emergency accident happens, just draw the safety pull rod, and the machine will stop immediately. It is safe and reliable.
4.Transmission use hardened NGW planetary reducer or herringbone gear reducer, compact structure, low noise and high efficiency.
5.Machine using a whole body of the base or sub-base, easy installation.
6.The turning of the cylinder sieve will repeatedly send back those unqualified bigger rubber chips for further cracking.
Technical Parameters:
(m/min) Linear Speed of Front Roll(m/min)
|
|
|
|
Linear Speed of Front/Rear Rolls
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(r/min) Motor Rotating Speed(r/min)
|
|
|
|
|
|
NGW Planetary Hard-Gear Speed Reducer
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|