Auto Push-Out Mould Press:
The machine is applicable for vulcanizing all kinds of rubber and plastic model and non-model products.
Characteristic:
1.This machine is column structure, including main machine, hydraulic station, electric controlling cabinet. Main machine is composed by base, plunger piston, platform, beam, automatic mould pushing-out device and compulsory mould opening device.
2.Under the control of PLC, this machine achieves automatic mould closing, vulcanization timing, exhausting time and frequency setting, mould opening, mould pushing, and so on.
3.The mixing chamber is a combined configuration, which is convenient for assembling, disassembling and maintaining. The drop-door discharge device is driven by two reciprocating oil cylinder which directly pull the locking plate to lock the discharge door. The device provides fast discharging and reliable airproof.
4. The rotors are supported by rolling bearings, which are easy to maitain and have a long service life.
5.The transmission system adopts a hard facing gear reducer, which has a compacted structure with higher transmission effciency, lower noise and longer service life.
6.The pressing ram device may be driven by pneumatic cylinder or oil cylinder to press onto the mixing materials to force them equally mixed so as to increase productive effciency. Mated with the electric controller, the pressing ram device can automatically add pressure, release pressure or just keep floating.
7.Both manual and automatic modes are arranged to operate PLC electric system. It is easy to exchange the modes and reliable to operate the controller.
Technical Parameters:
TYPE |
XLB-D600X600/1.60MN |
TOTAL PRESSURE(MN) |
1.60MN |
PLATE SIZE(MM) |
600X600 |
PLATE DAYLIGHT (MM) |
350 |
DAYLIGHT NO |
1 |
PISTON STROKE(MM) |
350 |
PLATE UNIT AREA PRESSURE(KG/CM2) |
44.5 |
OVERALL DIMENSION(MM) |
700X1700X1800 |
WEIGHT(KG) |
5100 |
|
