Batch-off Cooler:
It is coupled with internal mixer,rubber roll-head extruder or rubber sheeting mill. The plasticated stock,masterbatch and final stock from the inernal mixer are calendered into sheet via the rubber roll-head extruder or rubber sheeting mill. The sheet is dipped,cooled and dried,then continuously swing and pilled up in the batch-off cooler.

Characteristic:
1.The take=off adopts steel conveying rollers,equipped with printer and slitter. The take-off and lifting device are driven by a common AC inverter motor. The conveying speed id adjustable.
2.There are two types of hanging bar driving devices. For XPG(III)-900,when the piston bars of two side oil cylinders extend,they push the hanging bar. The one way bearing keeps the hanging bar standing when the oil cylinder cylinder piston bar retracts,therefore the hanging bar carry out intermittent movement. Other one is driven by one AC inverter motor. The speed of hanging bar is synchronous with the take-off and lifting device.
3.The sheet is uniformly coated with the lubricator by dipping without polluting the environment. Its cooling effect is better than the spraying.
4.The hanging up area is fully closed,which adopts the blower to blow the sheet at a slant. So it improves the air flowing direction and cooling effect.
5.The robot in the take-off is advanced in china. The take-off can be controlled automatically.
6.The electric control system adopts a reliable and automatic PC.
NOTES:
1.The machine can be designed as a floorid construction or an over-head construction. The sheet can be output on the first floor or on the second floor or both the first and the second floor.
2.The batch-off cooler is a conbined construction. Customer can add or reduce the middle support as required.
3.Customer can select the transverse strip cutter and the strip slitter according to the processing requirements.

Technical Parameters: