|
Tread cooling and winding line:
Main technical parameter:
| type of the tread(max width) |
350mm |
| type of the tread(max thinckness) |
25mm |
| fetch and the feed equipment(feeding belt width) |
500mm |
| fetch and the feed equipment(motor power) |
1.5kw |
| up and down spray feeding belt(feed width) |
500mm |
| spray feed length(up) |
9000mm |
| spray feed length(middle) |
9500mm |
| spray feeding belt |
3kw |
| overall dimension |
(L×W×H)10000×800×1200 |
Note:
1. It consists of fetch and feed belt,slope feed belt,high spray feed belt,middle spray feed belt,low spray soaking or cooling feed belt,drying equipment.It can also equiped with tyre sheet rolling equipment or synchronized cutting equipment.
2. Controls and electrical systems used mitsubishi made in Japan
Automatic horizontal type bias cutter:
Main technical parameter:
| Tyre |
WM1500 |
| max of the tire cord fabric width |
1500 mm |
| the max diameter of the cord fabric |
1500mm |
| width of the feeding belt |
1600mm |
| cutting width |
70-1600mm |
| variable angle |
0-90mm |
| cutting capacity |
20/min |
| capacity of the cutting cord fabric |
0-60m/min |
| motor power |
5.5kw |
| working pressure |
0.5-0.7mpa |
| overall dimensions power |
15380x4800x2300mm |
| weight |
8000kg |
| Tech parameterdimension |
10530×3130×2130 |
| package dimensions |
3200×5530×1740 |
Steel wire extruder and wind up line:
Main technical parameter:
| maximum diameter of steel ring |
711.2mm |
| minimum diameter of steel ring |
100mm |
| inner diameter of steel ring applied to extension frame |
355mm |
| number ofextension frame |
2-6 |
| electric-heated temperatur |
20-350V |
| bead roll diameter |
760 |
| overall dimension |
150000x3200x3100mm |
| weight |
9500KG |
Tire building machine:
Main technical parameter:
| Tyre |
KC120
|
| suit for tyrp of tire |
8"-28" |
| the speed of the building drum |
25-140 R/min |
| max width tire tire face |
220 mm |
| max thickness tire sheet range |
25mm |
| max of the tire cord fabric width |
400 mm |
| the max diameter of the cord fabric |
500mm |
| the max diameter of the tire |
680mm |
| dring powerof the main motor |
1.5kw |
| the air pressure |
7kg/cm2 |
| dring power of the conveying cloth system |
0.75x2kw |
| conjugating form of the molding drum and main unit |
(8~12)(14~18)(18~28) |
| overall dimension(LxWxH) |
2280x2210x1650mm |
| weight |
2000kg |
Hydraulic press for tyre machine:
Main technical parameter:
| Tatal pressure |
65T |
| Operation calmping force |
35T |
| Planten number |
5 |
| working layer number |
4 |
| steam chamber internal dia |
850mm |
| pistion |
250mm |
| the low pressure |
5Mpa |
| pressure in bladder |
0.6~0.8Mpa |
| internal distance between platens |
240mm |
| hadraulic oil press available |
15Mpa |
| overall dimension |
1200X1000X2100 |
| weight |
4000KG |
|
